1 / 2
Axle for 625-2RS bearings — zdjęcie 1
1 / 2

Axle for 625-2RS bearings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Drybox roller axle designed for 625-2RS bearings with shaped shaft and without screws.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I recommend printing this horizontal with supports to ensure higher strength on the 5mm shaft. PETG is my go to as PLA is weaker and might warp when drying fillament. ABS would probably work fine.

Alternately, printing vertical should be fine but has the downside of layer line weakness. Any supports should just pop right off with the tapered shaft.  


Thanks to @Extrutim for the original box design, and @HighWayManfor the inspiration of improved spool rods.

Tagi