1 / 2
Makergear M2 EZ feed guide for 5mm Teflon tube — zdjęcie 1
1 / 2

Makergear M2 EZ feed guide for 5mm Teflon tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Hockenmaiers M2 Filament guide. I used his guide for a while but it does not feed well with the larger than…

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Remix of Hockenmaiers M2 Filament guide. I used his guide for a while but it does not feed well with the larger than stock guide tube.

I only use the middle hole, so removed the others and clipped off the end. I also completely redid the filament path.

The new guide has a collar that holds the 5mm teflon tube (which is a nice upgrade in itself). Under the collar is a 2.5mm hole that opens to a large 7mm funnel. The funnel shape compensates for the angled filament coming off the roll and now the filament feeds better than ever.

Print Settings

Printer Brand:

MakerGear

Printer:

M2

Rafts:

No

Supports:

Yes

Resolution:

.20mm layers

Infill:

30% hexagon

Notes:

I used supports to make the feed holes nice and round.

It may also help to drill out the bolt holes a bit, mine were too snug.

Category: 3D Printer Accessories

Tagi