Makergear M2 EZ feed guide for 5mm Teflon tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Hockenmaiers M2 Filament guide. I used his guide for a while but it does not feed well with the larger than…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Remix of Hockenmaiers M2 Filament guide. I used his guide for a while but it does not feed well with the larger than stock guide tube.
I only use the middle hole, so removed the others and clipped off the end. I also completely redid the filament path.
The new guide has a collar that holds the 5mm teflon tube (which is a nice upgrade in itself). Under the collar is a 2.5mm hole that opens to a large 7mm funnel. The funnel shape compensates for the angled filament coming off the roll and now the filament feeds better than ever.
Print Settings
Printer Brand:
MakerGear
Printer:
M2
Rafts:
No
Supports:
Yes
Resolution:
.20mm layers
Infill:
30% hexagon
Notes:
I used supports to make the feed holes nice and round.
It may also help to drill out the bolt holes a bit, mine were too snug.
Category: 3D Printer Accessories