Magnetic Shelf Label – Dynamic Slotting (4x 20x6x2 mm Magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic warehouse label for dynamic slotting—easily split or resize shelf spaces. Embedded 20x6x2 mm magnets, no glue.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Created specifically for warehouse process optimization, barcode scanning accuracy, and flexible inventory management, this heavy-duty magnetic shelf label eliminates the hassle of permanent adhesive labels.
In a dynamic warehouse environment, stock levels and product dimensions constantly change. Instead of scraping off old stickers, you can instantly slide or move these magnetic holders to split, merge, or resize shelf locations. Each holder is divided into two separate slots: a wider slot for the location QR code and rack/pallet ID (e.g., PALLET 1), and a smaller dedicated slot for the specific item name and SKU/ID. When the stored product changes, you only swap out the small item card while keeping the location QR code intact.
To prevent accidental misreads when labels are placed vertically above or below each other on adjacent shelf levels, the model includes two mirrored versions (Location/QR Left and Location/QR Right). Alternating them between rows ensures warehouse scanners never pick up the wrong QR code.
Key Features
Dual-Slot Design (Location QR + Item Card): Separates the permanent location QR code/name from the changeable product card, so you only update what's necessary when stock changes.
Left & Right Versions (Error-Proof Scanning): Includes mirrored variants (QR code on the left vs. right) so stacked shelves don't interfere with barcode scanners.
Dynamic Space Optimization: Effortlessly reposition labels along the beam to divide a single shelf space into smaller slots (e.g., splitting a location in half) or expand it when stock grows.
Embedded Magnets (No Glue): Four rectangular magnets are sealed inside the model during a mid-print pause, providing a strong, industrial-grade hold.
Scratch-Free & Durable: No exposed metal on the back means zero scratches on painted or powder-coated racking, even with daily adjustments.
Optimized for Batch Production: Uses minimal filament and prints cleanly in batches, making it cost-effective for outfitting entire warehouse aisles.
Included Versions
QR Left Version: Wider slot on the left for the location QR code and position name, smaller slot on the right for the changeable item card.
QR Right Version: Smaller slot on the left for the item card, wider slot on the right for the location QR code and position name.
Hardware Needed
Magnets: 4× rectangular neodymium magnets (**20 × 6 × 2 mm**) per label.
Print Settings & Instructions
Orientation: Print standing upright on its bottom edge as oriented in the file.
Brim (Required): Use at least a 5 mm brim. Because the model is tall and narrow, a wide brim is essential to ensure bed adhesion and prevent tipping—especially when inserting the magnets.
Pause for Magnets: In your slicer, add a Pause Print (M601) at the layer right before the top of the magnet pockets close. Insert all four 20×6×2 mm magnets during the pause and resume printing.
Material: PLA