Chubby Sitting Cat Figurine, Likely Support-Free
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chubby sitting cat with its tail tucked in and a low, rounded base — a small FDM desk figurine.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
A chubby sitting cat with the tail tucked in and a low, rounded base — designed as a small desk figurine for FDM printing.
This is an original one-piece figurine, scaled 70 mm tall (bounding box about 67 × 67 × 70 mm). The mesh is watertight and manifold, with a fully flat base, so it sits stably on the build plate. Features are chunky: thick short ears, paws fused to the body and base, and no whiskers.
What you get
- 01_cat_PlanPerch.stl — a single printable part (no assembly)
- Gallery images are 3D renders of this printable mesh on a light background. They are not photographs of a physical print. We have not included real print photos.
Print settings (recommended, not yet test-printed on our side)
- Nozzle: 0.4 mm
- Layer height: 0.16–0.20 mm
- Walls / infill: at least 3 walls, 10–15% infill
- Material: PLA (PETG is fine too)
- Orientation: print standing on the flat base
- Brim: optional, if your bed adhesion is weak
- Supports: likely not needed. A printability check found only a small amount of overhang steeper than 45° (about 4.9% of surface area). Short bridges or rounded forms may still print support-free, but please preview the slice before you commit. If your slicer flags issues under the belly or around the base transition, add light supports there.
License
- Printables: Standard Digital File License (recommended). Personal, non-commercial printing; do not redistribute the digital files.
Created with AI-assisted modeling (Tencent Hunyuan 3D), then manually repaired and checked for printability.