1 / 3
Zhang Shun, White Streak in the Waves: Otter Diver Figure (120 mm) — zdjęcie 1
1 / 3

Zhang Shun, White Streak in the Waves: Otter Diver Figure (120 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zhang Shun from Water Margin as an otter diver with a trident. 120 mm with a base, made with AI image to 3D.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Zhang Shun, White Streak in the Waves of Water Margin, reimagined as an otter diver in a brass diving collar, with a long tail and a trident.

The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 72 x 71 mm across, and needs roughly 26 g of PLA by our estimate.

How it was made: the character was turned from a single image into a textured 3D model with 3DLoom's image to 3D (https://3dloom.com/image-to-3d) and exported as a print-ready STL with a base. The back was inferred by the AI, so it is simpler than the front.

Print notes: about 0.3% of the model is thinner than 1 mm. The trident shaft and prongs are the thinnest parts, so check them in your slicer and support them. Resin or a 0.2 mm nozzle will keep more of the detail.

I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.

Part of a set of Water Margin heroes reimagined as animal warriors. The rest of the set is on my profile.

Tagi