1 / 3
Zhang Shun, White Streak in the Waves: Otter Diver Figure (120 mm) — image 1
1 / 3

Zhang Shun, White Streak in the Waves: Otter Diver Figure (120 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zhang Shun from Water Margin as an otter diver with a trident. 120 mm with a base, made with AI image to 3D.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Zhang Shun, White Streak in the Waves of Water Margin, reimagined as an otter diver in a brass diving collar, with a long tail and a trident.

The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 72 x 71 mm across, and needs roughly 26 g of PLA by our estimate.

How it was made: the character was turned from a single image into a textured 3D model with 3DLoom's image to 3D (https://3dloom.com/image-to-3d) and exported as a print-ready STL with a base. The back was inferred by the AI, so it is simpler than the front.

Print notes: about 0.3% of the model is thinner than 1 mm. The trident shaft and prongs are the thinnest parts, so check them in your slicer and support them. Resin or a 0.2 mm nozzle will keep more of the detail.

I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.

Part of a set of Water Margin heroes reimagined as animal warriors. The rest of the set is on my profile.

Tags