Hua Rong, Little Li Guang: Falcon Archer Figure (120 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hua Rong from Water Margin as a falcon archer with a longbow. 120 mm with a base, made with AI image to 3D.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Hua Rong, Little Li Guang of Water Margin and its finest archer, reimagined as a falcon archer in a long coat, with a quiver of arrows and a longbow.
The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 75 x 42 mm across, and needs roughly 27 g of PLA by our estimate.
How it was made: the character was turned from a single image into a textured 3D model with 3DLoom's image to 3D (https://3dloom.com/image-to-3d) and exported as a print-ready STL with a base. The back was inferred by the AI, so it is simpler than the front.
Print notes: about 0.4% of the model is thinner than 1 mm. The bow and arrows are the thinnest parts, so check them in your slicer and support them. The bowstring is too thin to come through in full; add a piece of thread after printing if you like. Resin or a 0.2 mm nozzle will keep more of the detail.
I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.
Part of a set of Water Margin heroes reimagined as animal warriors. The rest of the set is on my profile.
