Hua Rong, Little Li Guang: Falcon Archer Figure (120 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hua Rong from Water Margin as a falcon archer with a longbow. 120 mm with a base, made with AI image to 3D.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
Hua Rong, Little Li Guang of Water Margin and its finest archer, reimagined as a falcon archer in a long coat, with a quiver of arrows and a longbow.
The STL is one closed, watertight solid, 120 mm tall including a fitted base, so it stands on its own. It is about 75 x 42 mm across, and needs roughly 27 g of PLA by our estimate.
How it was made: the character was turned from a single image into a textured 3D model with 3DLoom's image to 3D (https://3dloom.com/image-to-3d) and exported as a print-ready STL with a base. The back was inferred by the AI, so it is simpler than the front.
Print notes: about 0.4% of the model is thinner than 1 mm. The bow and arrows are the thinnest parts, so check them in your slicer and support them. The bowstring is too thin to come through in full; add a piece of thread after printing if you like. Resin or a 0.2 mm nozzle will keep more of the detail.
I haven't printed this one myself yet, so photos and settings from your print are very welcome as a Make.
Part of a set of Water Margin heroes reimagined as animal warriors. The rest of the set is on my profile.
