Makita Battery 10.8v BL1013
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makita Battery 10.8v BL1013 case only
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a design i made using pictures from the internet of the original battery and the drill i own for reference because i don't have an original makita battery.
I tried to make it compatible with the internals of the original BL1013, however i can't confirm compatibility. If anyone owns one and prints my design aswell, please leave feedback on what i need to change.
Printing:
Top case: printed using PETG, upside down orientation
Bot case: printed using ABS, normal orientation.
Latch / Clips left - right: printed using ABS, horizontal orientation to make the latch strong at the tips
Assembling:
You will need 3 small screw to fit the base with the top case. The latches need to be pushed in their places on the bottom case, the tolerances are 0 so you may need to take a utility knife and scrape them to make it fit. After installing the latch you may find that its a bit too wide, depending on the tool, if that happens just use the utility knife to shave 1 millimeter from the side that's in the way.