Makita Battery 10.8v BL1013
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makita Battery 10.8v BL1013 case only
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a design i made using pictures from the internet of the original battery and the drill i own for reference because i don't have an original makita battery.
I tried to make it compatible with the internals of the original BL1013, however i can't confirm compatibility. If anyone owns one and prints my design aswell, please leave feedback on what i need to change.
Printing:
Top case: printed using PETG, upside down orientation
Bot case: printed using ABS, normal orientation.
Latch / Clips left - right: printed using ABS, horizontal orientation to make the latch strong at the tips
Assembling:
You will need 3 small screw to fit the base with the top case. The latches need to be pushed in their places on the bottom case, the tolerances are 0 so you may need to take a utility knife and scrape them to make it fit. After installing the latch you may find that its a bit too wide, depending on the tool, if that happens just use the utility knife to shave 1 millimeter from the side that's in the way.