Spinodal Egg Lantern for IKEA Tealights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 101 mm egg-shaped spinodal lantern with a socket for an IKEA tealight (Ø38 mm).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
An egg-shaped shell with an organic spinodal pattern, open at the top for heat, sitting on a base with a tealight socket. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.
Made for a standard IKEA tealight (Ø38 mm), which sits in a Ø39.6 mm socket; the top is open for heat. For a real flame print in PETG or ASA and never leave it unattended – an LED tealight is the safest choice, as PLA softens near heat.
PRINT SETTINGS
Size: 73 × 73 × 101 mm, approx. 28 g of PLA
Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls
Print upright on the flat base; add tree supports only where your slicer reports overhangs
Always follow your filament manufacturer's recommended temperatures first
Part of the Revo3D generative collection. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en