Self-Watering Spinodal Planter – 2 Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A self-watering planter: spinodal outer reservoir plus an inner pot with a wick tube.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A two-part self-watering planter: a watertight outer reservoir with spinodal relief and an inner pot with a wick tube. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.
FILES
Outer reservoir and inner pot. Thread a cotton wick through the wick tube, fill the reservoir through the gap at the rim. Print the reservoir with 3+ walls and check it is watertight; PETG is recommended.
PRINT SETTINGS
Size: 142 × 142 × 140 mm, approx. 240 g of PLA
Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls
Print upright on the flat base; add tree supports only where your slicer reports overhangs
Always follow your filament manufacturer's recommended temperatures first
Part of the Revo3D generative collection. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en