1 / 1
Self-Watering Spinodal Planter – 2 Parts — image 1

Self-Watering Spinodal Planter – 2 Parts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A self-watering planter: spinodal outer reservoir plus an inner pot with a wick tube.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

A two-part self-watering planter: a watertight outer reservoir with spinodal relief and an inner pot with a wick tube. Generated algorithmically (signed distance fields + marching cubes), checked watertight and printable.

FILES

Outer reservoir and inner pot. Thread a cotton wick through the wick tube, fill the reservoir through the gap at the rim. Print the reservoir with 3+ walls and check it is watertight; PETG is recommended.

PRINT SETTINGS

Size: 142 × 142 × 140 mm, approx. 240 g of PLA

Nozzle 0.4 mm, layer 0.16–0.2 mm, 2–3 walls

Print upright on the flat base; add tree supports only where your slicer reports overhangs

Always follow your filament manufacturer's recommended temperatures first

Part of the Revo3D generative collection. Made by Revo3D, builders of large-format Revon 3D printers – revo3d.pl/en

Tags