1 / 4
Stern Pinball Flipper Bat (Part No. 515-5133) — zdjęcie 1
1 / 4

Stern Pinball Flipper Bat (Part No. 515-5133)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stern 3 inch Pinball Flipper Bat modified for FDM printing

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is an FDM printable version of the official Stern Flipper Bat for a pinball machine.

A colleague's daughter needed some of these for her science project and I found this site while trying to find the dimensions of a pinball flipper. The FDM model is based off this model  originally modelled by Mark Seiden in fusion. i have attached his model here as an STL in case anyone wants to SLA, MJF, SLS or whatever it but its designed for injection moulding so keep that in mind. 

There are two versions of the FDM model here, one which is solid and has a TPU sleeve (the original Stern Flipper has a rubber sleeve), and one which has the base separate from the top, so you can print multiple colors or materials or the bottom in TPU instead of using the sleeve. 

The shaft hole diameter is 6.35mm, with PLA shrinkage I used a 6mm steel pin and it worked as an interference fit. The flipper bat measures 76.462 x 24.313 x 18.245.

Tagi