1 / 5
Barbed T, Y, Straight, Elbow, Reducer & End Plug (Ø3–10 mm) + Sorting Box — zdjęcie 1
1 / 5

Barbed T, Y, Straight, Elbow, Reducer & End Plug (Ø3–10 mm) + Sorting Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable barbed hose fittings for hose ID 3–10 mm + sorting box: T, Y, straight, elbow, reducers and end plugs.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Barbed hose fittings for hose ID Ø3–10 mm, stored in a box with 2 double-width and 4 single bins. Every bin has 6 compartments with raised size labels. The lid has an engraved title.

Parts

  • T-CONNECTOR – splits one line into two

  • Y-CONNECTOR – splits at 60° for smoother flow

  • STRAIGHT – joins two hoses or repairs a cut one

  • ELBOW 90° – a sharp turn without kinking the hose

  • REDUCER – 4→3, 5→4, 6→4, 8→6, 10→8, 10→6

  • END PLUG – closes a hose end

Each arm has two barbs with a sharp catch edge that holds the hose. Ready-made plates: each type ×4 in all sizes, plus a sampler with one of everything.

Printing

  • Fittings: PETG, 100 % infill, 0.2 mm (0.15 mm for Ø3–4), no supports. Straight, reducer and plug print upright. T, Y and elbow print flat.

  • Box, bins and lid: PLA or PETG, 0.2 mm, 15 % infill. The lid prints face-down, and a text inlay is included for two colours.

Good to know

For low pressure only: aquariums, drip irrigation, water cooling, vacuum lines. Add a hose clamp or a zip tie for extra hold. Print one fitting first and test it with your hose.


Designed & built by Ing. TULák

GitHub: https://github.com/davidvancl

Printed it? Share a Make! Questions or ideas? Drop them in the comments.

Thanks for printing – may your hoses never leak again!

Tagi