Barbed T, Y, Straight, Elbow, Reducer & End Plug (Ø3–10 mm) + Sorting Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable barbed hose fittings for hose ID 3–10 mm + sorting box: T, Y, straight, elbow, reducers and end plugs.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Barbed hose fittings for hose ID Ø3–10 mm, stored in a box with 2 double-width and 4 single bins. Every bin has 6 compartments with raised size labels. The lid has an engraved title.
Parts
T-CONNECTOR – splits one line into two
Y-CONNECTOR – splits at 60° for smoother flow
STRAIGHT – joins two hoses or repairs a cut one
ELBOW 90° – a sharp turn without kinking the hose
REDUCER – 4→3, 5→4, 6→4, 8→6, 10→8, 10→6
END PLUG – closes a hose end
Each arm has two barbs with a sharp catch edge that holds the hose. Ready-made plates: each type ×4 in all sizes, plus a sampler with one of everything.
Printing
Fittings: PETG, 100 % infill, 0.2 mm (0.15 mm for Ø3–4), no supports. Straight, reducer and plug print upright. T, Y and elbow print flat.
Box, bins and lid: PLA or PETG, 0.2 mm, 15 % infill. The lid prints face-down, and a text inlay is included for two colours.
Good to know
For low pressure only: aquariums, drip irrigation, water cooling, vacuum lines. Add a hose clamp or a zip tie for extra hold. Print one fitting first and test it with your hose.
Designed & built by Ing. TULák
GitHub: https://github.com/davidvancl
Printed it? Share a Make! Questions or ideas? Drop them in the comments.
Thanks for printing – may your hoses never leak again!