64 models
Robert's simple, elegant design just needed a little tweak to keep my recycled plastic shopping bags from getting sucked out the window when I accidentally open it too far. My fix is a less-than-elegant TinkerCAD booger weld job.
A Barbed Devil perfect for your tabletop game! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
NO GLUE → https://www.printables.com/model/388142-rose-no-glue FILE GCODE 🌹SUPER ROSE🌹 Nozzle 0.4mm Print 0.2mm Infill 15% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→…
BSPP G1/4 barbed hose fitting for hoses between 5 and 7mm of Internal diameter. It has a small recess to fit an O-ring with 17mm of external diameter and a maximum of 2 mm thick. The barbs larger and smaller diameters are, respectively…
1-1/2 Inch Female NPT Pipe Thread to 1-1/2 Inch Male Barbed End 1 : 1.5 Inch FEMALE NPT Pipe Thread One model has a 6 sided hexagon for crescent / pipe wrenching End 2 : 1.5 Inch MALE Barbed (3 Inch) Additional model - TPU Washer – TPU…
Description: These are adapters for Submersible pumps. 2 have odd sizes which fit my cheap Amazon pumps Printables wouldn't allow me to have the “.” in .526 (meaning ½") in the file name. So if your curious what 526 means. thats why. I…
A super easy design, but looking great on the table: Barbed wire! Basically, this is just 5 steel rods glued together with some wire, but I'm really happy with the results. I used a super standard iron wire (like what you can get for…
This choker, bracelet, and armband set is inspired by barbed wire. It is meant to be printed with flexible filament. The choker and bracelet use a clasp and chain to wear and the armband needs ¼" elastic. I usually do your wrist…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Two versions, one barbed, one stubby beaded. I highly recommend you print this model with the barb pointed down. This accomplishes three things: You'll need supports regardless. They might as well be easy to remove. This orientation…
A set of two 3D models for printing fake barbed wire. The coil measures ~168cm in total length, and prints 19cm wide so should fit on most machines. An 84cm straight section is also included for belt printers. Both models are repeatable,…
½ inch to 13mm barbed pipe adapter. I use this to connect my solenoid valves to the 13mm irrigation pipe which I use for the garden
Printed in PETG on the Bambu Lab P1P at 0.8mm layer height. Added barb, slightly shorter length, tighter fit and added a few rounds. Works the same as the original, just more of a tighter, snap-fit. Post geometry based on a PTFE connector…
I needed barbed wire for my halloween costume accessory. I found the original barbed wire, but it was layed down straigh
✨ Description: The Gold Crown of Barbed Wire is a symbolic and artistic representation inspired by historical and cultural references. This unique design features interwoven barbed wire patterns arranged in a circular crown shape,…
This is untested right now, I'll update when I've tried it out. I remixed this to be used as a vacuum restrictor for use on my car. I made several different sizes to test them out. I'm using this in the vacuum line between my supercharger…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
remix of a quite well done garden hose fitting, makde to fit a 5/8 inner diameter hose, and with stardard garden hose male thread. I suggest printing at least in PETG, as PLA might get soft in the sun. Also, dont skimp on the walls do at…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Print in TPU, .6mm nozzle, .3mm layer height. Lock down with zip ties. Tested underwater from outlet of my pump.
This is untested right now, I'll update when I've tried it out. I remixed this to be used as a vacuum restrictor for use on my car. I made several different sizes to test them out. I'm using this in the vacuum line between my supercharger…
This is an orc character for use in D&D and other tabletop gaming, By default, it should print with a 32mm base. scale up and down to suit your needs. It prints pretty well with auto tree supports at 0.08mm layers. The supports need a…
This is a customizable (parametric) openscad script that lets you create a barbed adapter between a (water) pipe and a hose. I created it because I needed an adapter from the faucet to an ¼ inch (~6mm) ID hose for a Liebig condenser. The…
This is untested right now, I'll update when I've tried it out. I remixed this to be used as a vacuum restrictor for use on my car. I made several different sizes to test them out. I'm using this in the vacuum line between my supercharger…
I printed this fitting to adapt the soft tubing (9mm inner diameter) used to refill the battery of a forklift. The other side has a diameter of 15mm
Hose Adapter Collection – 45 Barbed Hose Reducers A complete collection of 45 different barbed hose adapters and reducers , covering hose sizes from 1/4" up to 2" . The collection includes both same-size connectors and different-size…
I am constructing a rotating hydroponic tower and need a swivel adapter for my water lines. As I did not find one I liked, I designed my own. I am using with this hose: https://www.amazon.com/gp/product/B07MQK7SQH This connector is NOT…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I have not been able to successfully print this. I'm hoping that it's possible to print with resin. Leaks like a sieve with FDM. The horizontal layer lines make it unusable. Just posting this in case someone can figure out how to make it…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
1/2" Barbed adapter for cheap Submersible Pumps
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- This specialized barbed connector was designed to firmly…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
We needed to attach a 60mm thread to a 25mm hose. Only off the shelf solutions we could find would have needed multiple parts and connections. I'm a bit apprehensive about using a 3D printed part like this in such a critical section of…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
An anchor barbed to hold soundproofing foam to a wall or ceiling. Holes are made for fixing with staple gun or nails. Category: Audio
Lets you attach a 1/2" poly hose to a pump having a 8.6mm / 0.34in barbed connection. Instructions I created this so that I could attach a 1/2" poly hose to a pump that had a smaller barbed connector. I put some super glue on it and slid…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I copudont find a mode similar to this so I asked CLAUDE (AI) to make on for me in OpenScad so other could adapt it to their own needs. This creates a a custom adapter to connect standard US 3/4" Garden Hose Threads (GHT) to a custom…
A Barbed Devil. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toy & Game Accessories
A flat, flexible, barbed drain hair snake that rakes hair clogs out of a shower, bath, or sink drain. Push the tip down the drain, twist, and pull — the backward-pointing harpoon barbs grab the hair and drag the clog back out. One-piece…
For connecting a 3/4 inch hose via a barbed connection to a 3/4 BSP thread. Optimized for printing upside down (barb end on plate). Put supports on at least the first barb "ring" to make it stable since it has a small contact surface:…
Print end dekor jór vstupní dveře or branku.
I needed an adapter for my dishwasher drain outlet hose late at night, so instead of waiting for the shops to open the next morning, I printed one! No supports needed - Model will load upside down in .stl so print on wider end! 80mm…
I printed this cap in PolyFlex TPU 95A.
Tight fitting barbed hose (25mm) adapter for SeatoSummit manual bilge pump with filtered end to stop large debris https://seatosummit.com.au/products/solution-bilge-pump Category: Parts
This part has misleading dimensions because of its connections to tubing and pipe. I've included two models, one for 3/8 in tubing and the other for ½ in Irrigation Tubing . The ½ inch irrigation tube doesn't have any dimensions that is ½…
A simple, sturdy straight connector for joining two hoses of the same size. The two ends are barbed spigots that push into the hose ; a central collar acts as a hard stop so both hoses seat to the same depth. Typical uses: Condensate…
cross for lego barbed wire
Pick from common hose sizes, such as 1/2" or 5/8", number of barbs, barb size, etc. I've successfully printed this standing veritcally in PLA and PA11 nylon. Both without supports, though PA11 required a brim. I'm not an openSCAD wizard,…
Made this model to replace the barbed fitting on my aerator after the one that was included snapped. I highly recommend printing with 4+ walls, high infill percent, .15mm or smaller layers, and PETG or stronger filament.
Printed at an angle for strength in ABS @0.2mm layer height. I also sanded the flat part for a good seal.
This is related to the modular hydroponic tower system: In the US, half inch inner diameter vinyl hose is commonly available to connect between the water pump and the top of the hydroponic tower. I'm able to get the hose in 10 foot…
I made a wort chiller for brewing beer and needed a barbed adapter for the kitchen faucet. The threads are (15/16"-27) for US faucets and the barbed end fits 3/8" ID tubing. Print Settings Printer: Makerfarm i3v 10 inch Rafts: No…
How to find your fit. Connector_(Side A outer diameter in mm)-(Side B outer diameter in mm) If you want different sizes just comment and might add it.
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
same coupler i just joined it together to do away with the need for the coupler tube and the multi piece print.
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
# Parametric Hose Attachment Dual barbed-end hose connector — pick each end independently in OpenSCAD. ## Usage Open hose_attachment.scad in OpenSCAD and use the Customizer panel. - size_A , size_B — select per end: 1/2 , 5/8 , 3/4 , 1 ,…
This fitting is made to be an alternative to an airstone in a RDWC hydroponic setup and works with a 16mm OD garden hose. Printing: There is a flat surface at the bottom to lay the part onto in the slicer and keep the barbs level with the…
Barbed anchor stake for wire tree cages This is a strong, flat-printed garden stake designed to secure hardware-cloth or welded-wire tree cages against deer nudging, wind, and accidental movement. The hook fits over the bottom horizontal…
I made a wort chiller for brewing beer and needed a barbed adapter for the kitchen faucet. The threads are (15/16"-27) for US faucets and the barbed end fits 3/8" ID tubing. Print Settings Printer: Makerfarm i3v 10 inch Rafts: No…
![Barbed Wire [TPU ONLY]](https://media.printables.com/media/prints/1051002/images/7962412_02939390-b7cb-4470-aa7f-ee5f73a81c63_8a8bb4b0-14b1-4ec2-acac-b9de4e4ab0cf/large_display_img_20241006_160342842.jpg)
