Vertical Hydroponic Tower- Barbed Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Barbed connector from vertical hydroponic array pipe to individual towers.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This part has misleading dimensions because of its connections to tubing and pipe. I've included two models, one for 3/8 in tubing and the other for ½ in Irrigation Tubing.
The ½ inch irrigation tube doesn't have any dimensions that is ½ an inch so be aware of this when purchasing tubing. The OD is 0.70 inches and the ID is 0.62 inches; therefore, the stl labeled “0.5In Irrigation Tube_ 3-4NPT Pipe” has a 0.610 inch max OD on the barbs to connect to the ½ in tube ID.
Both parts are designed to fit over a ¾ NPT in Black Steel Pipe (which is actually about 1 in OD). I drilled holes in the steel pipe to allow water to flow through and threaded both ends with ¾ in pipe tap.