Vertical Hydroponic Tower- Barbed Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Barbed connector from vertical hydroponic array pipe to individual towers.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This part has misleading dimensions because of its connections to tubing and pipe. I've included two models, one for 3/8 in tubing and the other for ½ in Irrigation Tubing.
The ½ inch irrigation tube doesn't have any dimensions that is ½ an inch so be aware of this when purchasing tubing. The OD is 0.70 inches and the ID is 0.62 inches; therefore, the stl labeled “0.5In Irrigation Tube_ 3-4NPT Pipe” has a 0.610 inch max OD on the barbs to connect to the ½ in tube ID.
Both parts are designed to fit over a ¾ NPT in Black Steel Pipe (which is actually about 1 in OD). I drilled holes in the steel pipe to allow water to flow through and threaded both ends with ¾ in pipe tap.