1 / 2
80/20 Series (10) 1” x 1” Aluminum Extrusion zip-tie mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I could not find a zip tie mount to hold wiring down that met my needs so i decided to make this. The mount hole is…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
I could not find a zip tie mount to hold wiring down that met my needs so i decided to make this. The mount hole is for a 1/4-20 button head screw.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.300mm
Infill:
100%
Category: Other