Megadeth Nuclear Radiation Emblem Logo Wall Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print Megadeth's iconic logo layered over a nuclear radiation hazard plaque with multiple print options.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rust in Peace for your music room, studio, or metal den! This 3D wall display plaque layers the iconic razor-sharp typography of Big Four thrash metal legends Megadeth over a bold nuclear radiation hazard emblem.
This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Modular Print & Assembly Options:
One-Piece Print: Prints the nuclear radiation symbol and raised Megadeth lettering together as a single unified plaque.
Separated Cut-In Assembly: Includes a nuclear symbol plate with recessed letter cutouts paired with separated lettering for crisp, multi-color inlay assembly without needing an AMS/MMU.
Separated Surface-Mount Assembly: Includes a whole nuclear symbol plate with mounting keyholes paired with separated lettering designed to glue directly onto the top surface. (Note: Mounting keyholes sit behind the "E" and "T" positions).
Standalone Nuclear Symbol: Also includes a clean, whole nuclear hazard emblem without keyholes if you want to print and display the symbol by itself.
File Formats Included:
Separated lettering is provided in both STL and 3MF formats so you can easily split, color-assign, or rearrange individual letters in your slicer as needed.
Dimensions
Text Width: 10.5”
Text Height: 2”
Text Thickness: 0.5” (stands 0.375” proud above the nuclear symbol)
Nuclear Symbol Diameter: 8”
Nuclear Symbol Thickness: 0.125”
Insets: 0.0314” and 0.0157”
Total Thickness: 0.5”
Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws for a completely flush wall mount.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the sharp serifs and blocky angles of the letters).
Infill: 10% or higher (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Bed Orientation: Rotate the model 45 degrees diagonally to fit cleanly on standard 220 x 220mm print beds.
Looking for the standalone bordered name logo?
Check out my companion listing here:
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: