Megadeth Nuclear Radiation Emblem Logo Wall Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print Megadeth's iconic logo layered over a nuclear radiation hazard plaque with multiple print options.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Rust in Peace for your music room, studio, or metal den! This 3D wall display plaque layers the iconic razor-sharp typography of Big Four thrash metal legends Megadeth over a bold nuclear radiation hazard emblem.
This model is part of my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Modular Print & Assembly Options:
One-Piece Print: Prints the nuclear radiation symbol and raised Megadeth lettering together as a single unified plaque.
Separated Cut-In Assembly: Includes a nuclear symbol plate with recessed letter cutouts paired with separated lettering for crisp, multi-color inlay assembly without needing an AMS/MMU.
Separated Surface-Mount Assembly: Includes a whole nuclear symbol plate with mounting keyholes paired with separated lettering designed to glue directly onto the top surface. (Note: Mounting keyholes sit behind the "E" and "T" positions).
Standalone Nuclear Symbol: Also includes a clean, whole nuclear hazard emblem without keyholes if you want to print and display the symbol by itself.
File Formats Included:
Separated lettering is provided in both STL and 3MF formats so you can easily split, color-assign, or rearrange individual letters in your slicer as needed.
Dimensions
Text Width: 10.5”
Text Height: 2”
Text Thickness: 0.5” (stands 0.375” proud above the nuclear symbol)
Nuclear Symbol Diameter: 8”
Nuclear Symbol Thickness: 0.125”
Insets: 0.0314” and 0.0157”
Total Thickness: 0.5”
Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws for a completely flush wall mount.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the sharp serifs and blocky angles of the letters).
Infill: 10% or higher (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Bed Orientation: Rotate the model 45 degrees diagonally to fit cleanly on standard 220 x 220mm print beds.
Looking for the standalone bordered name logo?
Check out my companion listing here:
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: