1 / 1
Yolin RC Lipo Storage Shelves — zdjęcie 1

Yolin RC Lipo Storage Shelves

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have a Yolin rc lipo storage cabinet - but the shelves are too big for regular RC lipos, so here are printable shelves

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

I have a Yolin rc lipo storage cabinet - but the shelves are too big for regular RC lipos, so here are printable shelves! 

I created one specifically for larger 4S basher batteries, one for typical 3-4S crawler batteries, and one for storing shorty lipos on their sides.  

When you slice these, you can stretch them if you want additional space.  I recommend stretching them in width by ~2mm to make them fit the box well.   I sizes the print so most printers should be able to handle the size, but made them just about 2mm too narrow to snuggly fit inside the cabinet...they have a little too much wiggle room.  

The odd-looking 50mm standoff on the back of the shelves is to allow for airflow to the fire extinguishing pucks at the back of the cabinet.  

I expect not many people will need these designs - but if you are one of the few, I hope they help you!

Tagi