1 / 5
Comgrow SH04 4 Spool Filament Dryer Divider
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was having issues randomly where the spool would slide to the outside and not spin freely.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 3
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I was having issues randomly where the spool would slide to the outside and not spin freely. It wasn't often but frustrating on a long print to see a filament jam error. I decided to make a divider for each side to keep the spool in place. I printed in ASA and has been working great.