The Ant PCB Maker - PCB lock bar mod with modified locking hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed new base boards so there was an occasion to modify existing lock bar so it would fit my needs (to swap them…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I needed new base boards so there was an occasion to modify existing lock bar so it would fit my needs (to swap them easily and easy probe disconnection).
I wanted to stop the nuts slipping in original lock bar (in my case it was an issue), so I modified original lock bar as shown on the picture. The nuts are blocked in their positions. They can't move along that bar, but they don't slip anymore for me.
As a pin for locking hook I used medium-sized car pin (dimensions are on attached picture).
Thanks for The Ant Team for that project!
The ANT: https://www.youtube.com/channel/UCX44z-SSL7LzcB4xxgUdHHA/videos
Print Settings
Printer:
Prusa clone
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament:
local PLA
any
Notes:
On my printer I had to scale up X and Y (horizontal plane) by 1.02 due to PLA shrinkage
Category: DIY