Liczymy pasujące modele…
At first many thanks to Conr8r for the Upgraded Modular Hydroponics Tower . I made some addons so you can build your own tower with even more flexability. These parts are compatible with his design. I designed additional shelfs with one…
Additional parts, you can never have enough vertical spacers, especially ones that allow you to route though them! Note that some of the designs require you to also print the base ring and glue that in to the part. Should all be self…
Magazine cap, replacement floorplate, and extended buttpad for a PS90Magazine cap, replacement floorplate, and extended buttpad for a PS90
I was having some ejection issues with the widowaxe, and realized it was because my shells were slipping out of the extractor claw. Gluing these two pieces on solved it, and made low-speed ejection considerably more reliable. Glue them on…
Sandworm 3D printer - Levelup Addons: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
I always wonder why they make narrow shoes. Are there people who don't have big toes on their feet? I've bought a shoe-stretcher to widen space for the big toes, but it also has non-anatomic shape (the left and the right foot is the…
Sandworm 3D printer - Levelup Addons: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
A rail to make adding stuff under your table easier… I recommend you print the screws at 100% infill, they sometimes snap when printed at lower infills, also you might need pliers to twist them into place, the tolerance is quite low The…
Just the mobile controller clip for the 8bitdo Pro series of controllers . It can be modified to add various clips to the top including as an example i added magsafe by combining it with a magsafe stand. There are step files in the…
I was having some ejection issues with the widowaxe, and realized it was because my shells were slipping out of the extractor claw. Gluing these two pieces on solved it, and made low-speed ejection considerably more reliable. Glue them on…
A clean, sturdy, and expandable Modular Desk Shelf system. Designed to be both functional and aesthetic, this system uses 22-23mm wooden dowels as rails, allowing you to build a shelf at the exact length you need for your setup. Features:…
Three nerf sights compatible with nerf n-strike rail system. One is red dot inspired the other is ACOG inspired. Both have standard nerf attachment system on the bottom for nerf n-strike rail. ACOG and one red dot have nice 4 holes to…
I lovaed Karak and I love Karak II. Karak meets Catan, what can go wrong? Well, the box could be better. Much better. So here come some improvements: reworked “material” insert (with lid). This is the bigger insert for hero cards, player…
some extra parts and modified parts
Warning: Untested. Still in the process of printing the original parts - so these are still untested. Gaskets for “Regenerative Compressor” - print them in (soft) TPU with sparse infill. A Center hub for use with aliexpress "Flange…
A pc fan stand for 140mm fans with expansion possibilities. Later I intend to remake the leg to be something that could be attached to something or weight down easily. I recommend printing the fan-holder part like on the second picture so…
Although the original designs are great, after / during the build of my annealer, i found that some of the parts did not quite fit together right or the tolerance were too tight. I also designed some new parts that help out with the…
Redesigned the model of MK3S+ Fan Addons. I do not wanted to glue it to the fan and was not able to screw the original due to the small holes and to the uneven areas of the corners of the fan. So added the form of corners to the part to…
I was using the feet made by schuetzi99 and then wanted to add side drawers (https://www.prusaprinters.org/prints/53765-side-drawers-for-prusa-mk3-i3). But the feet were too wide and would not let he drawers sit nicely. So I chopped them…
Enhance your DJ Control Mix experience with these versatile addons! Keep your setup organized and efficient with our battery holder, ensuring your equipment stays powered up. Stay refreshed during long sessions with the handy cup holder.…
These are addons that I've made for my generic kitchen organizer. I don't remember what brand this is, but I've seen a number of places selling similar kitchen organizers. Addons Side Storage Basket This sits on the foot of the kitchen…
Here is a commemmoration maker coin for good ol' 3D Benchy, as coins are also a staple of the maker culture (although maybe are losing popularity) and I couldn't find a single one on Printables (maybe now there's more than one…). OVERVIEW…
I printed the red dot sight that @ThompsonStudios made, but I felt like there were somethings that could be improved. My list of things that weren't quite the way I wanted is: The battery slot was not very good, and I wanted a slide in…
I always wonder why they make narrow shoes. Are there people who don't have big toes on their feet? I've bought a shoe-stretcher to widen space for the big toes, but it also has non-anatomic shape (the left and the right foot is the…
These are some addons for the TMS-ASTRO (photo) new aluminum EQ platform. https://tms-astro.eu There is (probably) more to come … Cheers Axel See my video series on eq platforms part 1 to 3 (starting with part 1):
a bigger back part to make RedCowls stock feel better and a part to stiffen the transition a but more.
This is a custom-made 3D printed add-on kit designed to enhance portability and organization for a Kaya Shisha hookah set stored in its original carry case. What's included in the design: Charcoal box: Designed to fit a standard TOM COCO…
All parts can be attached to the original multifunctional arm without reprinting anything. The softer attachments on the base and clamps should prevent damage to the arm mounting surface as well as provide extra grip. The phone holder…
This is a remix of Retro Frog's excellent compact MiSTer case updated for MisterAddons' latest IO boards. It is compatible with the de10 nano, USB hub 2.1, and either the IO Direct or Analog Pro from MisterAddons. You will need 15mm…
This is a remix of Retro Frog's excellent compact MiSTerPi case updated for MisterAddons' latest IO boards. It is compatible with the RetroRemake MiSTerPi Board, RetroRemake USB Hub, and either the IO Direct or Analog Pro from…
I didnt have time to make any model on top of this but i am working on a toolbox and bottleholder by the time that this is published… This model is ment as a modular part for where you would usually put a bottleholder. UPDATE 1 Added a…
A rail to make adding stuff under your table easier… I recommend you print the screws at 100% infill, they sometimes snap when printed at lower infills, also you might need pliers to twist them into place, the tolerance is quite low The…
Some parts for Bronehod/Demolisher/Hurricane vehicles from Robogear/Bronepehota Project site: vk.com/hexagon_addons
I made these bumpers and a plug for a Rail Clamp Mast (umbrella/flag) Mount for my Gigparts POTA20 and POTA33. I took out the top bolt to keep the mast from getting scratched. The plug is screwed to the bottom using the other bolt. This…
I purchased this body model for an Axial SCX10ii and created some additional parts for it. https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/jeep-grand-cherokee-1977-body-for-print The lights are for the left side only but you…
This model allows you to mount addons like little boxes to the babybay bed side crib. The drill pattern consists of 4 holes with a rectangular spacing of 15x100mm. My parts were printed in eSun PLA+, light brown. They were printed with…
This design focuses on organizing spray cans upright-vertically instead of laying horizontally. The goal is to organize the spray cans held within an external storage (e.g. milkcrates, drawers. recycled boxes) to prevent the cans from…
Some parts for more flexibility for your arm. Tilt base (a base where you can rotate your arm arount) use with the elbow joint elbow joint, for fun angles shorter arms if you don't need that far reach. and a gripper to hold a small probe…
EDIT: 7.9.2026: Due to some reports of production variances and meeple thickness etc - I am uploading today a modified version of the Player Board that went from a 6.2mm deep well to a 10mm deep well for the Hammers and Melody tokens as…
I did some alternatives for the original design, hopefully to improve the experience even more. You can just use whatever you feel makes sense, no necessity to use them all. Note that all my Mods are only done and tested for the TPU Hook…
I really Liked the original from HB9GXS but I wanted a tighter fit, so I added some little nubbins and also thought about addons. Everything is Compatible with 16mm Pipes outer Diameter, like the original. House Feet: These come in at the…
Just the mobile controller clip for the 8bitdo Pro series of controllers . It can be modified to add various clips to the top including as an example i added magsafe by combining it with a magsafe stand. There are step files in the…
Addons and modifications for Microlab for my setup Tray for Raspberry Pi 4 - 0.5U with inlet for USB cable to power Cudy network switch Tray for Kamrui AK1Plus Tray for Cudy 5-port network switch Top Cap modification for handles + handles…
A clean, sturdy, and expandable Modular Desk Shelf system. Designed to be both functional and aesthetic, this system uses 22-23mm wooden dowels as rails, allowing you to build a shelf at the exact length you need for your setup. Features:…
A update to the talon fang u to use the better grip from the mini claw and allow miniclaw based top rail accessories as well as using standard tcu couplers. The only thing that really are required are the new u channel spacing and the new…
Foxeer T-rex mini camera mount - there are two marks for set camera angle from 25 to 45 degrees printing without supports Buzzer holder for speedybee original buzzer - printing without supports MQ10 GPS mount (with port for foxeer…
Just did a quick scan of the Share C1 so I can design some Add-ons I might need for future projects (and maybe a drone mount xD). Wanted to get the can in the wild should anyone also need it. At least the battery is similar to the Share…
These are a couple accessories for Marsgizmo's Filament Bunker which can be found at the link below. The first thing is a lid for the desiccant storage to keep the silica beads from spilling out. The thing will need to be scaled slightly…
I added a knob (superglue) to make it easier to turn and printed a TPU cover for the hole.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) JAPANDI FLOATING FOUNTAIN…
I have been printing a few of these to use in my game and realised i need a few things so i remixed them and thought i would share so enjoy :) Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: .26mm…
Plate spacer is intended to lift the printing plate 2.5mm further from the resin vat, to allow for a magnetic sheet & spring steel plate. Drip arm is intended to fit over top the plate spacer. Shovel is for cleaning globs out of the resin…
Whatever filament should work fine, as there is no real heat issue, but use 0.1mm layers so the curves are smooth. The 5015 intake will slide and stay on the bolt heads. The tail cone will need to be glued(dot of super-glue) onto the back…
Above Ground Pipeline Addons Now expand and addon to your pipeline, now and again. Be it your wargame, diorama, a scenic vista you are trying to create, or a hardcore game of 40K! Well, here's a cheap and dirty addon to your set of…
These are shower shelves compatible with Iconic Nordic Rooms INR PILE shower interior solution created in order to increase the storage possibilities. These models were designed to be easily printed without the need of support material.…
Adept Trance has created a great base for the Apple charger including IPhone, Magsafe and optionally the Apple watch. Thank you for this. I added feet which should be printed in TPU. I also added a cover for the bottom, so the cables stay…
If you have the passively cooled case from MiSTer Addons and want to spice up your buttons, I designed these replacement buttons to fit it. Print 3 buttons. I recommend printing them upside down (top of the button on the built plate) so…
Update 1: fixed jaw files were not included, added now. A project ive been working on for some time, the model 301 Tapping Arm is a mostly printed tool to help with tapping. For the past 8 months its been my entire tapping setup,…
This box will hold the sleeved cards of all Mansions of Madness investigators, including all expansions and packs. Now that it is known that the mansion of madness will not get any further expansions, I decided to redesign my previous…
Files description: wtp_postitive - use this as filler for ends or as a template to add to your model (adjust height to 2.84 mm) wtp_negative - use this as a template to subtract from your model. wtp_staright1 - straight piece length 1…
Recently got the new Gamers Nexus soldering mat and decided to make a mount to attach cups, dishes, trays, or anything else to the soldering mat using the existing holes. Files included are a dual cup that attaches to the top right of the…
UPDATED #1 - 07/11/2023: Added USB lid for the USB socket . I found this great design (remix at the bottom) that inspired me to make some detachable modules and new versions of the LCD cover to support WiFi signal improvement (see my…
Remix der Pipeline-Addons-V2-Vertical Rohre, um sie innen ausgehöhlt als echte Rohre verwenden zu können.
Vase Mode Tissue Box: https://www.printables.com/model/471423
These are the add-ons that I made for the Syfy (now Amazon) Expanse helmet ( https://www.thingiverse.com/thing:2127463 ). Lense Covers are printed in Novamaker Clear PETG. https://www.amazon.com/gp/product/B0746DXJ8F/ Face Jets are…
here are some addons for the DC775 Turbine from https://www.printables.com/de/@PINGUIN 1st i added a screen for the backsite you can attach a charcoal filter with that and use the turbine as a fume extractor or you can spin the turbine…
Practical addons to have on a music stand. Recommended print settings are noted in README file. Changelog: 24.11.2018: Fixed threading on frame part 1. 30.11.2018: Improved recommended print settings, added a new part. Leave tips and/or…
Addons I made to expand stage capabilities of my IKEA FJÄLLBO shelf. Shelf support that enables action of extra half depth (16cm) shelves. Can be used from both sides for a full depth shelf. In my case, used 51x16 acrylic to add 2 new…
Attachment parts for the small pushing bots. This thing contains basically anything thatcan be attached or exchanged, but mainly wheels. All wheels are designed for the SG90 servo motors. Robots can be found here:…
Three nerf sights compatible with nerf n-strike rail system. One is red dot inspired the other is ACOG inspired. Both have standard nerf attachment system on the bottom for nerf n-strike rail. ACOG and one red dot have nice 4 holes to…
The CNC 4018 Pro doesn't have a lot in terms of mounting spots for additional components, this is my organizational items to get the machine the way I wanted it to be. You can download the items here or go get the CAD file and modify as…
Some addons for the Mini ESP32 TV by Megazoid. I already have the popular Simpsons TV and also built the Mini ESP32 TV and started to wonder if I could also make a Mini Simpsons TV. Its a similar retro style so used the original case…
got some marble kit (cascade lena) for my kids and they love it so I created some addons all uploaded stl's are tested and work ok, thing is "in progress" as I'll be probbly uploading more parts in the future Category: Playsets
Several Addons for Leifheit Cleaning equipment. 2 different Storage fixations One Pole extention to link 2 Poles together Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 200 Infill: 20% Filament:…
This Pack only contains the two addons for the A13. If you want the full model , check this page! I used abbreviations for the file names, else they'd be to long. But they're pretty simple to understand: B is short for ‘ Backpack ’ 4A is…
I found out that an enclosure isn't only good for printing ABS / ASA or protecting the printer from dust, but it also can be used to organize things you need for 3D printing. I used the sides of the Tukkari TLX enclosure to attach…
I lovaed Karak and I love Karak II. Karak meets Catan, what can go wrong? Well, the box could be better. Much better. So here come some improvements: reworked “material” insert (with lid). This is the bigger insert for hero cards, player…
Here is a collection of different attachments for a PS4 joystick. Choose one and print it in TPU or any other flexible material. It should be possible to print everything without supports, but the hexagons I would still print with, just…
For all to fit in the box i needed to make some new adjustments. More addons coming so everything can fit in the box and easy to pick up and use.
some additions for 2020 NUT 5 extrusions as seen in the picture.
I've created some usefull addons for the Tukkari Enclosure for the Creality CR-6 SE (this one: https://www.tukkari.eu/p/tukkari-tf-creality-cr6-se-enclosure-box-with-combined-air-filter ) The bottomplates I've designed this for a better…
Massive clamp Rail system with lots of accessories Clamp system that can be used with rails to have 1, 2, or 3 accessories on 1 clamp. Also included is the clamp-less rails with screw holes to be able to mount it to the wall. Clamp system…
some extra parts and modified parts
![Table Rails For Addons [plus a bin i added now but i am too lazy to print...]](https://media.printables.com/media/prints/d3a0c167-84cc-41bc-9f00-d32905b5ad7b/images/10507436_8417ab99-fc49-4a0b-b887-5d6850edf69f_87c2fd22-fe6a-4b44-b315-cf3c3ef83482/img_20250822_145650154.jpg)
