Mini ESP32 TV - Simpsons Addons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some addons for the Mini ESP32 TV by Megazoid. I already have the popular Simpsons TV and also built the Mini ESP32 TV…
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Some addons for the Mini ESP32 TV by Megazoid. I already have the popular Simpsons TV and also built the Mini ESP32 TV and started to wonder if I could also make a Mini Simpsons TV.
Its a similar retro style so used the original case files and created the VCR box to glue on top. I used 1.75mm filament as the antennae, maybe a little too thick but you can use whatever you want, the hole is 2mm so glue maybe required to keep it in place.
I also designed a replacement select button. You dont have to use it, the original tact switch will work but if you want to use my remixed select button you will need a 6x6x4.3mm tach switch rather than the 9.5mm. I think a 5mm will also work as there is some wiggle room (you could always sand down the select button base if its a little tight)
I did wonder about some feet but not sure how well they would adhere.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Notes:
Printed in PLA+ but any material should be fine. May need a brim around the select button, I didnt personally.
Category: Electronics