1 / 2
Nissan 370Z Lower Storage Box (Open, No Door) — zdjęcie 1
1 / 2

Nissan 370Z Lower Storage Box (Open, No Door)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A drop-in open storage compartment for the lower center stack. Holds an iPhone Plus or smaller plus sunglasses.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
1
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Fit
Made for the Metra 99-7607B dash kit (Metra "Dash Kit for Select 2009-2020 Nissan 370Z DIN/DDIN, Black", for cars without factory nav). It will NOT fit the factory dash opening.
Tested: 2020 370Z 50th Anniversary Edition (Bose, no nav)
Other 2009-2020 non-nav cars: should fit, untested
Pairs with my radio bezel: 

Want a flip-down door? See the hinged version: 

Hardware
Optional: self-adhesive felt to line the cavity and stop rattles.

Print settings
Creality K1 Max, Polymaker ASA (Jet Black), 0.4 nozzle, 0.2 layer, 250-260 C nozzle / 100-105 C bed, Grid 15% infill. Don't use the stronger ASA profile; it isn't needed. Supports: yes. Orientation: Default. Print time: 16-18 hours.
Tip: slice the cavity in half, print the two sections, then join them with glue or tape around the outside.

Finishing
Unfinished black ASA.

Files and license
STEP source on GitHub: github.com/50thZ/370z-3d-prints (print-ready 3MF/STL to be added).

CC BY-SA 4.0. Independent project, not affiliated with Nissan.

"Nissan" and "370Z" are Nissan trademarks, used only to describe compatibility. Provided as-is.

Tagi