Nissan 370Z Lower Storage Box (Open, No Door)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drop-in open storage compartment for the lower center stack. Holds an iPhone Plus or smaller plus sunglasses.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 1
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Fit
Made for the Metra 99-7607B dash kit (Metra "Dash Kit for Select 2009-2020 Nissan 370Z DIN/DDIN, Black", for cars without factory nav). It will NOT fit the factory dash opening.
Tested: 2020 370Z 50th Anniversary Edition (Bose, no nav)
Other 2009-2020 non-nav cars: should fit, untested
Pairs with my radio bezel:
Want a flip-down door? See the hinged version:
Hardware
Optional: self-adhesive felt to line the cavity and stop rattles.
Print settings
Creality K1 Max, Polymaker ASA (Jet Black), 0.4 nozzle, 0.2 layer, 250-260 C nozzle / 100-105 C bed, Grid 15% infill. Don't use the stronger ASA profile; it isn't needed. Supports: yes. Orientation: Default. Print time: 16-18 hours.
Tip: slice the cavity in half, print the two sections, then join them with glue or tape around the outside.
Finishing
Unfinished black ASA.
Files and license
STEP source on GitHub: github.com/50thZ/370z-3d-prints (print-ready 3MF/STL to be added).
CC BY-SA 4.0. Independent project, not affiliated with Nissan.
"Nissan" and "370Z" are Nissan trademarks, used only to describe compatibility. Provided as-is.