1 / 1
Rayven Talon Mag Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts your full-length Rayven magwell into a half-length Talon magwell easily!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need talon-adapter-lever.stl and talon-adapter-lever-block.stl from the original model.
Supports recommended though not required, only the catch area.
Very low hardware requirements, pretty much only requiring some M3 screws and a spare full-length dart. Although the original model says you should use a pen spring, I found that cutting off the head of a full-length dart and using that as the lever spring worked just as well if not better. It also has the added benefit of being much easier to install.