1 / 1
Two-Dome Woolly Hat Stand | One-Piece Beanie Holder — zdjęcie 1

Two-Dome Woolly Hat Stand | One-Piece Beanie Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A desktop stand for two woolly hats or beanies. Two hollow domes share a low, rounded base and print together

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Give two woolly hats a place to sit on a desk, shelf, or dresser. Slip each hat over a rounded dome and let it rest on the shoulder. The domes are hollow with open tops, and the shared base keeps them spaced apart. The whole stand prints as a single part with no assembly.

Model details

  • Holds two woolly hats or beanies

  • Overall size of 212 × 100 × 64.4 mm

  • Two 94 mm domes with 18 mm between them at the base

  • One STL contains the complete stand

Material

PLA+

Nozzle

0.4 mm

Layer height

0.28 mm

Infill

10–15%

Supports

Off

Orientation

Flat base down, centred on the bed

Scale

100%

Brim

Optional. Use up to 3 mm on the M5C.

Temperatures

Use your filament profile.

The stand is designed to print without supports. On a 220 × 220 mm bed, the 212 mm length leaves 4 mm on either end when centred. Check the slicer preview to make sure the part and any brim or skirt fit within your printer’s usable area.