Two-Dome Woolly Hat Stand | One-Piece Beanie Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A desktop stand for two woolly hats or beanies. Two hollow domes share a low, rounded base and print together
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Give two woolly hats a place to sit on a desk, shelf, or dresser. Slip each hat over a rounded dome and let it rest on the shoulder. The domes are hollow with open tops, and the shared base keeps them spaced apart. The whole stand prints as a single part with no assembly.
Model details
Holds two woolly hats or beanies
Overall size of 212 × 100 × 64.4 mm
Two 94 mm domes with 18 mm between them at the base
One STL contains the complete stand
Material | PLA+ |
Nozzle | 0.4 mm |
Layer height | 0.28 mm |
Infill | 10–15% |
Supports | Off |
Orientation | Flat base down, centred on the bed |
Scale | 100% |
Brim | Optional. Use up to 3 mm on the M5C. |
Temperatures | Use your filament profile. |
The stand is designed to print without supports. On a 220 × 220 mm bed, the 212 mm length leaves 4 mm on either end when centred. Check the slicer preview to make sure the part and any brim or skirt fit within your printer’s usable area.