Film Development Tank 35mm 250ml V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of great 3D printed development tank enriched with handling upgrades
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of already amazing developing tank. Worked great for me, but I've encountered some difficulties while working with it. My remix reworked the lid, the funnel and the stopper parts. Lid now has cut slots for fingers to help rotate it and get it out, when developing is done. The stopper and funnel had a redesign to facilitate M20 thread to help keep thing in place. Last change is the added slot for TPU seal in the lid to lower leakage through the top part. And one piece of advice; print it with darker filament, learned the hard way. Assambly should be straight forward, You glue together funnel and lid, TPU seals should be glued to the lid and the stopper and you can, but dont have to glue the spool parts to each other (it is easier to load film into a movable spool and especially to clear jammed film).