TC147 Battery Monitor 1-1/8in Automotive Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for mounting a TC147 Coulometer Module to a traditional 1-1/8in panel mount hole.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is customizable in OpenSCAD, but requires the BOSL2 Library. The BOSL2 Library, Installation Instructions, and Documentation can be obtained here: https://github.com/BelfrySCAD/BOSL2/
Mount a TC147 Coulometer Module to a traditional 1-1/8in panel mount hole as typically seen in automotive, marine, and auxiliary 12v/24v applications. In my case I bought a Battery Box that came with a selection of adapters already installed, however I wished to switch out the simple included volt meter for a TC147 Module, but didn't want to have to try to retrofit the existing hole.
I printed my final version in PETG since I expect my battery box to be subjected to long periods in potentially 100°F/38°C+ heat, but if your application doesn't require such brutal conditions, or you're willing to risk it, it does print nicer in PLA on your average printer.