TC147 Battery Monitor 1-1/8in Automotive Mount Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for mounting a TC147 Coulometer Module to a traditional 1-1/8in panel mount hole.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is customizable in OpenSCAD, but requires the BOSL2 Library. The BOSL2 Library, Installation Instructions, and Documentation can be obtained here: https://github.com/BelfrySCAD/BOSL2/
Mount a TC147 Coulometer Module to a traditional 1-1/8in panel mount hole as typically seen in automotive, marine, and auxiliary 12v/24v applications. In my case I bought a Battery Box that came with a selection of adapters already installed, however I wished to switch out the simple included volt meter for a TC147 Module, but didn't want to have to try to retrofit the existing hole.
I printed my final version in PETG since I expect my battery box to be subjected to long periods in potentially 100°F/38°C+ heat, but if your application doesn't require such brutal conditions, or you're willing to risk it, it does print nicer in PLA on your average printer.