Dual Laptop Stand for Lenovo ThinkPad X1 Carbon, X390, X280, X13, T14s, MacBook Air, MacBook Pro & Other Slim Laptops – Double Vertical Laptop Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual Laptop stand for ThinkPad X1 Carbon, X390, MacBook & more. Custom sizing for thicker laptops.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Dual Laptop Stand for Lenovo ThinkPad, MacBook & Other Slim Laptops
Keep your workspace tidy and organised with this Double Vertical Laptop Stand, designed to securely hold two laptops side by side while saving valuable desk space.
The standard model is designed to accommodate slim laptops with thicknesses similar to the Lenovo ThinkPad X1 Carbon and X390, making it ideal for a range of modern business laptops.
Compatible Laptop Models (Standard Size)
Lenovo ThinkPad X1 Carbon
Lenovo ThinkPad X390
Lenovo ThinkPad X280
Lenovo ThinkPad X13 (selected models)
Lenovo ThinkPad T14s (selected models)
Apple MacBook Air (selected models)
Apple MacBook Pro (selected models)
Other slim laptops with similar thicknesses
Custom Sizing Available for Thicker Laptops
Need a stand for a thicker laptop? No problem!
The stand can be increased in size on the print bed to accommodate thicker laptop models, including:
Lenovo ThinkPad T480
Lenovo ThinkPad X230
Lenovo ThinkPad X240
Lenovo ThinkPad X250
Lenovo ThinkPad X260
Lenovo ThinkPad X270
Other thicker Lenovo ThinkPad, Dell, HP and similar laptops
If your laptop is thicker than the standard X1 Carbon or X390, simply get in touch with your laptop model before ordering so the stand can be adjusted to suit your requirements.
Key Features
Dual Laptop Storage: Holds two laptops vertically, helping maximise desk space.
Space-Saving Design: Ideal for home offices, workstations and compact desk setups.
Wide Compatibility: Designed for slim ThinkPads, MacBooks and other laptops of similar thickness.
Customisable Sizing: Can be made with wider slots to accommodate thicker or older laptop models.
Clean, Minimalist Appearance: Helps keep your workspace neat and organised.
Additional Rear Supports: Reinforced at the back to provide extra support higher up the laptops, helping improve stability.
Support-Free Printing: Designed to print without additional support structures.
3D Printing Information
This model has been designed with straightforward 3D printing in mind and has been printed using a Bambu Lab P1S/P2S.
Material: PLA
Filament Usage: Approximately 170g per stand
Estimated Print Time: Around 4 hours per stand
Tested Printers: Bambu Lab P1S/P2S
Supports Required: None
Print Bed Size: 235 × 235 mm
Bed Fit: The model just fits within the 235 × 235 mm print area, making full use of the available space.
Printing Notes:
The model is designed to print without supports, making it relatively straightforward to produce. However, it is a tight fit on a 235 × 235 mm print bed, so careful positioning in your slicer is recommended.
Print times and filament consumption are approximate and may vary depending on your chosen layer height, infill, wall count, print speeds and slicer settings.
Please Note: Increasing the model's dimensions to accommodate thicker laptops may cause it to exceed the standard print bed area. Check the model's dimensions in your slicer before printing an enlarged version.
Design Credits
This design is based on the original model by rknt, which I've adapted and expanded into a double laptop stand.
I've added extra supports at the rear to provide better stability and support the weight of the laptops higher up, helping keep them securely in place.
It's essentially a doubled-up version of rknt's original design, with additional reinforcement for improved support and practicality.
Important Information & Disclaimer
Please Note: The standard stand is sized for laptops with thicknesses similar to the ThinkPad X1 Carbon and X390. Thicker laptops, including the T480 and X230–X270 series, will require an enlarged version.
Laptop compatibility depends on the exact model, generation and thickness. Laptops shown or mentioned are for compatibility reference only and are not included.
Use at Your Own Risk: While this stand has been designed with additional supports to improve stability, the user is responsible for ensuring their laptops are correctly positioned and that the stand is placed on a flat, stable surface.
I accept no responsibility for damage to laptops, computers, accessories or any other equipment resulting from the stand tipping over, falling, breaking, failing or otherwise not supporting the equipment as intended, to the extent permitted by applicable law.
Please ensure the stand is suitable for your laptop's dimensions and weight before use. Avoid placing the stand near desk edges or in locations where it may be accidentally knocked over.
Nothing in this disclaimer affects your statutory consumer rights.
