1 / 1
Papilio Legend for Anthead — zdjęcie 1

Papilio Legend for Anthead

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mods for integrating the Papilio Legend extruder, Anthead toolhead, Crossbow Filament Cutter + EBB36 Gen 2.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

These mods are designed to work with the following toolhead options:

  • Anthead tool head

  • Papilio Legend belted extruder

  • Crossbow Filament cutter

  • EBB36 gen 2

Shoutouts

Person

Links

Note

kevinakasam

For creating the Papilio Legend belted extruder.

hartk

For creating the Anthead toolhead and his work on the Printers for Ants project.

lordofhyphens

For adapting hartks' Crossbow Filament cutter mount for Anthead. This mount is currently a pull request.

louisrousseau

For adding an optical filament sensore to the Papilio Legend. This is currently a pull request.

Needed Hardware

  • 10x Voron standard m3 heatset inserts

  • 4x M3x8 BHCS

  • 2x M3x8 SHCS

  • 1x M3x20 SHCS

  • 2x M3 hex or square nut

  • 4x M2x8 Self taping screws

  • An optical filament runout sensor (I've currently ordered these, haven't seen if they work with louisrousseaus' mod https://www.aliexpress.com/item/1005006020277719.html)

Notes

This is designed to work with the Anthead sherpa body.

If you don't use a crossbow cutter, print the regular Papilio Legend topshell and faceplate. I haven't personally tested this configuration so not sure if these mods work with that.

Tagi