Papilio Legend for Anthead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mods for integrating the Papilio Legend extruder, Anthead toolhead, Crossbow Filament Cutter + EBB36 Gen 2.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
These mods are designed to work with the following toolhead options:
Anthead tool head
Papilio Legend belted extruder
Crossbow Filament cutter
EBB36 gen 2
Shoutouts
Person | Links | Note |
|---|---|---|
kevinakasam | For creating the Papilio Legend belted extruder. | |
hartk | For creating the Anthead toolhead and his work on the Printers for Ants project. | |
lordofhyphens | For adapting hartks' Crossbow Filament cutter mount for Anthead. This mount is currently a pull request. | |
louisrousseau | For adding an optical filament sensore to the Papilio Legend. This is currently a pull request. |
Needed Hardware
10x Voron standard m3 heatset inserts
4x M3x8 BHCS
2x M3x8 SHCS
1x M3x20 SHCS
2x M3 hex or square nut
4x M2x8 Self taping screws
An optical filament runout sensor (I've currently ordered these, haven't seen if they work with louisrousseaus' mod https://www.aliexpress.com/item/1005006020277719.html)
Notes
This is designed to work with the Anthead sherpa body.
If you don't use a crossbow cutter, print the regular Papilio Legend topshell and faceplate. I haven't personally tested this configuration so not sure if these mods work with that.