Micro-ATX Stand (TFX PSU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully 3D printed open-frame stand built around a TFX PSU.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A fully 3D printed open-frame stand for MicroATX PCs built around a TFX PSU.
Required hardware:
Socket head bolts:
6 x M3x6 for connecting the motherboard to the frame.
5 x M3x12 for connecting the front and back legs to the frame.
5 x PSU bolts depending on your PSU (either M3, M4 or 6-32 x 6).
5 x M3 x 4 (or longer) threaded inserts for the frame connections. More if you need more attachment points.
For the split version that fits on a 250x210 bed, you'll also need two M3 nuts and 2 x M16 socket head bolts.
I used these red and white momentary switches for the power and reset buttons. A version of the front without any buttons is also included.
Many thanks to the authors of these models: