Small Drawer Dividers for PARKSIDE Parts Organizer 33 Drawers (allit VarioPlus Basic/Hobby 33)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim, sturdy dividers for the small drawers of the Lidl PARKSIDE 33-drawer parts organizer. They use very little filamen
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The PARKSIDE 33-drawer parts organizer comes with only 8 dividers, which is nowhere near enough for 24 small drawers. These dividers fit the existing slots in the small drawers, so you can split them as many times as you like.
The organizer is identical to the allit VarioPlus Basic 33 / Hobby 33. Aldi and Hofer also sell it under the Workzone brand, and the dividers should fit those too.
Features:
Saves filament: about 2.8 g each, and the wall itself is only 1.2 mm thick
Durable: a continuous bead along the top edge makes the divider stiff and doubles as a grip
Easy to remove: finger hole near the top, above the usual fill level
Fits the drawer: the sides are angled like the drawer walls, and chamfers at the bottom clear the drawer’s rounded floor edge
No supports needed: prints lying flat
Dimensions:
Width 64.8 mm at the top, 62.8 mm at the bottom
Height 27 mm
Thickness 1.2 mm (2.4 mm including the bead)
Files:
Trennstreg_klein.stl: standard version
Trennsteg_klein_-0.5mm.stl : looser fit
Trennsteg_klein_+0.5mm.stl: tighter fit
Print settings:
Material: PETG recommended, because it flexes instead of snapping. PLA works too.
Layer height: 0.2 mm
Nozzle: 0.4 mm
Walls: 3, which makes the divider fully solid
Infill: doesn’t matter
Supports: none
Orientation: lying flat, bead facing up
Happy sorting! I’d love to see your makes. 🙂
