Giant Darning Mushroom for Chunky Fabric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very large darning mushroom for mending chunky fabrics like blankets, jumpers and thick knitwear.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
The local repair café asked for a darning mushroom big enough for chunky fabrics: This one has a bigger cap and a much deeper groove compared to regular models.
This style of darning mushroom uses an elastic band that holds the fabric in place while you work on it. It also makes sure the tension in the fabric remains the same.
There are three different models:
One basic model with just the mushroom cap. This is shown in the pictures.
One model that includes a threaded stem.
One hollow model in case you want to add lighting from below (this one requires transparent filament and supports).
Dimensions
Cap diameter: 14cm (~5.5 inches)
Total height: 3.4cm (~1.3 inches)
Groove depth: 7.5mm (~0.3 inches)
You will need an elastic band that's around 34cm (~13 inches) long. I used 45cm (~18inches) and tied a knot in it.
Printing
Concentric top layers and concentric solid infill layers for a smoother finish
Adaptive layer height to counter the staircase-effect on the top of the dome
PLA works fine.
Customizing in OpenSCAD
The model is parametric. The OpenSCAD source is included and needs BOSL2.
The parameter set is in the .json.txt file. To use it, remove the .txt from the name and keep it next to the .scad files.
You can also check out the original model for some additional sizes: