1 / 23
Baby Milestone Plaques: 1-12 Months, 1 and 2 Years, and First Holidays (multicolour, with stand) — zdjęcie 1
1 / 23

Baby Milestone Plaques: 1-12 Months, 1 and 2 Years, and First Holidays (multicolour, with stand)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

22 round plaques for monthly baby photos and first holidays, with a display stand. Multicolour or one filament swap.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

A plaque for every month of the first year, two birthdays and eight first holidays, ready to slice and print. Prop one next to the baby for the monthly photo, then line them up on a shelf.

What's included (22 plaques)

  • 1 to 12 months, each in its own pattern: stars, hearts, daisies, roses, moons and stars, gingham, bunnies, polka dots and strawberries

  • 1 year and 2 years

  • First Easter, First Halloween, First Thanksgiving, First Christmas, First Hanukkah, First Lunar New Year (新年), First Eid and First Diwali, each in its own pattern and colours

Want a name on it? Make your own at https://terratinker.xyz/plaques : add the baby's name ("Mara / 8 / MONTHS", "Mara's First Christmas 2026"), write your own words, and choose the pattern, colours and size (150, 190 or 220 mm). It shows you the plaque in 3D before you download the files.

Files

  • <name>.3mf: the full-colour plaque, every colour as a part of one object, already coloured. Open it, match each part to a filament and slice.

  • <name>_2colour.3mf: a two-colour edition for printers without a filament changer. It needs one filament swap, at 4.0 mm.

  • plaque_stand.stl: a display stand that holds any of the plaques leaning back 14 degrees.

Print notes

  • Size: 190 mm across, 8 mm tall. Your bed needs to be about 200 mm or more (fine on a 256 mm Bambu or a Prusa MK4/Core One; too big for an A1 mini).

  • Print face up, flat on the bed. No supports.

  • Up to 4 filaments. The colours only change in the top 1.2 mm of the pattern, so a full-colour print has about 15 colour changes instead of dozens. The base and the lettering use the same filament.

  • Two-colour edition: start in the face colour and swap at 4.0 mm (add a filament change or pause at that height in your slicer). Everything raised prints in the second colour.

  • Stand: print foot down, no supports.

  • PLA at 0.2 mm layers; finer layers make the lettering crisper.

Licence: CC BY-NC 4.0. Print them, share them and remix them with credit, but please don't sell the files or the prints.

Tagi