BETAFPV Pavo20 Pro II shell case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact shell for BETAFPV Pavo20 Pro II - no supports and minimal bridging
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact shell for BETAFPV Pavo20 Pro II - no supports and minimal bridging.
It fits drone envelope as compactly as viable, while also being able to print with no supports and minimal bridging - only on the top, in front of the lens. Should be relatively crush-proof, pressing on the top half pushes down on the motor screws instead of the top canopy as I left a bit more clearance there. Retention mechanism is in the works, not happy with the clips I currently made (pictured), will probably drill some holes for a bungee.
To be printed standing on its rear/entrance, brim highly recommended. Shell thickness is 1.2mm, so infill/wall loops are not really relevant.