BETAFPV Pavo20 Pro II shell case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact shell for BETAFPV Pavo20 Pro II - no supports and minimal bridging
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact shell for BETAFPV Pavo20 Pro II - no supports and minimal bridging.
It fits drone envelope as compactly as viable, while also being able to print with no supports and minimal bridging - only on the top, in front of the lens. Should be relatively crush-proof, pressing on the top half pushes down on the motor screws instead of the top canopy as I left a bit more clearance there. Retention mechanism is in the works, not happy with the clips I currently made (pictured), will probably drill some holes for a bungee.
To be printed standing on its rear/entrance, brim highly recommended. Shell thickness is 1.2mm, so infill/wall loops are not really relevant.