1 / 1
centrifugal force science experiment — zdjęcie 1

centrifugal force science experiment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a physics experiment about centrifugal force

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a science experiment to study centrifugal forces.

BOM

15x M3 8mm socket-head cap screws

4x M4 mounting hardware to mount on 2020 extrusions

1x M4 22mm

1x neo 550

1x 6800 bearing

Printing with standard settings should be good, except for the pin, which should be 100% infill

assembly

Mount the gear to the motor

Place the pulley on the spinning assembly.

Place the bearing and the pin.

Place the spinning assembly on the bearing and add the bottom clamp, sliding it up the pin

Then, add the screws and put the conical thing on the pin. 

Place this on the mounting plate whilst putting on the motor.

Add the collar and extrusion

And all done

https://cad.onshape.com/documents/8bbc41b656a019664f429afa/w/edfbc38feb1f176c53abce97/e/e32041bfb1245e946e5b12be?renderMode=0&uiState=6af87906ec3d15a107d5b477 

Tagi