centrifugal force science experiment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a physics experiment about centrifugal force
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
This is a science experiment to study centrifugal forces.
BOM
15x M3 8mm socket-head cap screws
4x M4 mounting hardware to mount on 2020 extrusions
1x M4 22mm
1x neo 550
1x 6800 bearing
Printing with standard settings should be good, except for the pin, which should be 100% infill
assembly
Mount the gear to the motor

Place the pulley on the spinning assembly.

Place the bearing and the pin.

Place the spinning assembly on the bearing and add the bottom clamp, sliding it up the pin

Then, add the screws and put the conical thing on the pin.

Place this on the mounting plate whilst putting on the motor.

Add the collar and extrusion

And all done
