Delta Shower Handle Adapter – Replacement for Loose / Slipping Handle (Monitor & Scald-Guard)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable replacement for the worn Delta tub/shower handle adapter (like Braxton Harris DTSHA or brass 20-1650)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A printable REPLACEMENT for the Delta tub/shower handle adapter. On Delta Monitor and Scald-Guard single-handle valves the original plastic or brass adapter wears over time, so the handle gets loose and wobbly side to side, and in the worst case slips and no longer turns the water on or off. Print this and swap it in.
Part names for the original: Braxton Harris DTSHA (plastic, "Handle adapter for Delta tub/shower valves", UPC 693374095002), Specialty Products Plus 20-1650 (brass, "Delta Brass Handle Adapter"). Also called handle adapter, handle adaptor or stem adapter. I could not confirm the exact Delta OEM SKU.
Fits: Delta Scald-Guard and Monitor single-handle tub/shower valves (per the DTSHA listing). Tested on my own Delta valve only, so check your stem before printing.
Print settings I used: PETG (handles hot water well and is tougher than PLA), tree supports (much easier to remove than normal supports, with thin pliers, and less material). Size: 22 mm flange, 14 mm tall.
Designed in OpenSCAD. Source: github.com/rakhmanov/3d (shower-handle-holder).