1 / 3
DDR4 RAM Stick – 1:1 Scale Detailed Replica — zdjęcie 1
1 / 3

DDR4 RAM Stick – 1:1 Scale Detailed Replica

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Detailed 1:1 DDR4 RAM stick replica: 8 DRAM chips, SPD, 288 gold fingers, key and latch notches. Prints flat, no support

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

# DDR4 RAM Stick – 1:1 Scale Replica

A detailed, true-to-size replica of a desktop DDR4 memory module (288-pin UDIMM). A display piece for your desk, shelf, or PC-themed build.

## Details

- 133.35 × 31.25 mm, 1.4 mm PCB, 2.7 mm total thickness

- 8 DRAM chips with chamfered tops, pin-1 dimples, and silkscreen outlines

- SPD chip, resistors, and capacitors

- 288 gold-finger contacts (144 per side, 0.85 mm pitch) with a DDR4-style key notch

- Curved edge connector, latch notches, and corner pads

- Flat back, so it prints without supports

## Files

- Single-color STL: one fused solid, fingers engraved

- Multicolor 3MF: 9 named parts (PCB, DRAM chips, SPD, resistors, capacitors, terminals, gold fingers, silkscreen, mount pads)

- Parts ZIP: the same parts as separate STLs. Load them together as one multi-part object.

## Print tips

- Print flat with the back on the bed, no supports

- FDM: scale to 150–200%. At 1:1 the 0.25 mm finger gaps and tiny passives are below nozzle size. Resin prints at 1:1

- 0.12–0.16 mm layers, 100% infill

- Multicolor: assign a filament per part (green PCB, black chips, gold fingers, white silkscreen)

## Note

Display model only, not functional RAM. Generic design with no brand markings. Don't force it into a motherboard slot.

Tagi