DDR4 RAM Stick – 1:1 Scale Detailed Replica
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Detailed 1:1 DDR4 RAM stick replica: 8 DRAM chips, SPD, 288 gold fingers, key and latch notches. Prints flat, no support
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
# DDR4 RAM Stick – 1:1 Scale Replica
A detailed, true-to-size replica of a desktop DDR4 memory module (288-pin UDIMM). A display piece for your desk, shelf, or PC-themed build.
## Details
- 133.35 × 31.25 mm, 1.4 mm PCB, 2.7 mm total thickness
- 8 DRAM chips with chamfered tops, pin-1 dimples, and silkscreen outlines
- SPD chip, resistors, and capacitors
- 288 gold-finger contacts (144 per side, 0.85 mm pitch) with a DDR4-style key notch
- Curved edge connector, latch notches, and corner pads
- Flat back, so it prints without supports
## Files
- Single-color STL: one fused solid, fingers engraved
- Multicolor 3MF: 9 named parts (PCB, DRAM chips, SPD, resistors, capacitors, terminals, gold fingers, silkscreen, mount pads)
- Parts ZIP: the same parts as separate STLs. Load them together as one multi-part object.
## Print tips
- Print flat with the back on the bed, no supports
- FDM: scale to 150–200%. At 1:1 the 0.25 mm finger gaps and tiny passives are below nozzle size. Resin prints at 1:1
- 0.12–0.16 mm layers, 100% infill
- Multicolor: assign a filament per part (green PCB, black chips, gold fingers, white silkscreen)
## Note
Display model only, not functional RAM. Generic design with no brand markings. Don't force it into a motherboard slot.